LED floodlight is a point light source that can irradiate uniformly in all directions. Its irradiation range can be adjusted arbitrarily, and it is shown as a regular octahedron icon in the scene. Floodlight is the most widely used light source in the production of renderings, and standard floodlights are used to illuminate the entire scene. Multiple floodlights can be applied in the scene to produce better results. Floodlight is the most widely used light source in renderings. Multiple floodlights can be used in a scene to work together to produce better effects. Is to illuminate the object uniformly from a specific point to all directions.
Materials needed: LED guardrail lamp clamp, transformer with waterproof function, sub-controller, the steps are as follows:
1. Install guardrails and punch holes in the wall. The spacing is generally within 3 cm according to actual requirements;
2. Do a good job of anti-static measures, such as grounding the workbench, workers wearing corresponding static clothing, and anti-static measures, because different grades of LED floodlights have different qualities and different anti-static capabilities;
3. Pay attention to the tightness of the installation, the tightness is not good, and the diameter affects the service life of the LED floodlight;
4. The wiring of the LED floodlight is best not to exceed 25 cm, and the power of the transformer can be increased accordingly, otherwise the brightness will be affected.
1. Try to use the form of series LEDs, because the voltage difference of LED floodlights is special. The peak current of an ordinary LED is maintained at 80 mA, and the reverse voltage is around 6V. When designing an LED circuit, attention should be paid to the peak voltage and current under this limit.
2. Use a voltage below 25 watts when soldering, and control the temperature of the electric soldering iron below 300 degrees Celsius. Do not squeeze the epoxy resin part of the exposed SMD LED at high temperature, or wipe it with a sharp object, because the LED lamp is very fragile. It is very easy to damage, and the welding time is under 3 seconds.
LED floodlights are widely used, so installation skills and precautions are very important. LED is a new light source. Under the correct installation method, it can ensure the stable and long-term normal operation of LED floodlights.